Microstructure and hardness of Pyrowear 53 steel after low-pressure vacuum carburizing at 921°C
نویسندگان
چکیده
منابع مشابه
Gas and Vacuum Carburizing
The solution algorithm used in CarbTool is based on the finite difference method (FDM), and the code is developed using Microsoft Visual C++ in Window OS. The tool has been built on the concept of the carbon flux at the surface between the gas and steel is to be specified by the user. The outputs of CarbTool are the carbon concentration distribution profile inside the steel part and the surfa...
متن کاملExperimental Studies on the Microstructure and Hardness of Laser Transformation Hardening of Low Alloy Steel
An experimental investigation with Nd:YAG laser system was carried out to study the effects of laser hardening process parameters on the microstructure and hardness during laser hardening of EN25 steel. The laser beam is allowed to scan on the surface of the work piece by varying the laser beam power (750–1250 W) and travel speed (500–1000 mm/min) of the work table. The microstructural features...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملInvestigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies
Recently, bulk nano-structured materials produced by severe plastic deformation (SPD) have attracted scientists attention. Materials produced by SPD are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing. Several methods have been introduced for imposing the s...
متن کاملMicrostructure and Hardness of Surface Melting Hardened Zone of Mold Steel, SM45C using Yb:YAG Disk Laser
This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and 800 μm respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Manufacturing Science and Technology
سال: 2020
ISSN: 2300-2565
DOI: 10.2478/amst-2019-0020