Microstructure and Bond Strength of Steels Using Low-Cr-substituted Cementite Foil
نویسندگان
چکیده
منابع مشابه
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...
متن کاملEffect or Inoculation on Microstructure and Properties of Low C-Mn and Low Alloy Steels
Effect of the addition of various inoculants on the morphology and mechanical properties of low C-Mn and low alloy steel samples is studied by thermal and mechanical processing of the samples after solidification. According to the results obtained from metallographic studies with the electron microscope and microanalysis with x-rays, the distribution of inoculating agents in the steel matrix is...
متن کاملInfluence of silicon on cementite precipitation in steels
The mechanism by which relatively small concentrations of silicon influence the precipitation of cementite from carbon supersaturated austenite and ferrite are investigated. It is found that one condition for the retardation of cementite is that the latter must grow under para-equilibrium conditions, i.e. the silicon must be trapped in the cementite. However, this is not a sufficient condition ...
متن کاملPHASE STABILITY AND SEMICONDUCTING BEHAVIOUR OF LOW ACTIVATION AUSTENITIC MN-CR STEELS
Four compositions of austenitic Mn-Cr steels have been developed successfully for in-vessel component materials in power plant industry. The phase stability of these Mn-Cr steels was studied by and X-ray diffraction (XRD) patterns. XRD patterns have shown that the matrix of these Mn-Cr steels is a single γ-phase structure. The potentiodynamic polarisation curves suggested that these fabricated ...
متن کاملGlobal recrystallisation model of low carbon sheet steels with different cementite contents
This paper discusses the influence of Particle Stimulated Nucleation (PSN) on the overall process of nucleation and subsequent grain growth in low carbon (LC) steels and proposes a global recrystallisation kinetics model based on fundamental physical metallurgy principles. The model takes into account the cementite content, which is dependent on the nominal carbon content, and the second phase ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2011
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.51.423