Microstructural regulation, oxidation resistance, and mechanical properties of Cf/SiC/SiHfBOC composites prepared by chemical vapor infiltration with precursor infiltration pyrolysis

نویسندگان

چکیده

Abstract To further improve the oxidation resistance of polymer derived ceramic (PDC) composites in harsh environments, C f /SiC/SiHfBOC were prepared by chemical vapor infiltration (CVI) and precursor impregnation pyrolysis (PIP) methods. The weight retention change, mechanical properties, microstructure before after air studied details. Microscopic analyses showed that only interface between ceramics fibers was oxidized to some extent, hafnium had been enriched on composite surface oxidizing at different temperature. main products HfO 2 HfSiO 4 1500 °C for 60 min. Moreover, ratio compressive strength are 83.97% 23.88±3.11 MPa, respectively. It indicates should be promising used a short time environment °C.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microstructure of 3d Textile C/pyc/sic Composites Prepared by Chemical Vapor Infiltration

Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...

متن کامل

THE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES

In the present paper, the influence of cobalt additive on the sintering/infiltration behavior of W-Cu composite was studied. For this purpose, the mixed powders of tungsten and cobalt were compacted by CIP method and then sintered at 1450, 1550 and 1600 °C in a hydrogen atmosphere. The sintered specimens at 1550 °C were subsequently infiltrated with liquid copper at 1250 °C for 10, 60 and 1...

متن کامل

Modelling of Pyrocarbon Chemical Vapor Infiltration

The chemical vapor infiltration (CVI) of pyrocarbon is used to produce carbon matrix of C/C composites. This process involves complex physico-chemical phenomena such as the transport of gas mixtures (hydrocarbons and hydrogen) in the reactor and inside the fibrous preform, chemical reactions (pyrolysis and deposition), and the structural evolution of the preform. A global modelling approach has...

متن کامل

Grinding Effect of C/C-SiC Composites Prepared by Isothermal Chemical Vapour Infiltration during Braking Process

A kind of 2.5-dimensional C/C-SiC composites was fabricated by using Isothermal Chemical Vapour Infiltration process (ICVI). Frictional properties of this material were evaluated by using MM-1000 under dry condition. Average dynamic friction coefficient of it was 0.16, static friction coefficient and average coefficient stability were 0.15 and 0.56, respectively. However, weight wear rate was l...

متن کامل

Growth of Pyrocarbon by Multi-Physics Fields Chemical Vapor Infiltration

A novel rapid chemical vapor infiltration (CVI) processing defined by multi-physics fields CVI was used to fabricate carbon/carbon (C/C) composites. Liquid petrol gas is used as carbon source and the parameters were experimental tested and optimized. The influence of temperature and pressure on the growth of pyrocarbon was investigated in detail. Because of the influence of multi-physics fields...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Advanced Ceramics

سال: 2021

ISSN: ['2227-8508', '2226-4108']

DOI: https://doi.org/10.1007/s40145-021-0521-y