Microstructural features of SHS-pressing ZrB2-B4C and TiB2-B4C composites
نویسندگان
چکیده
منابع مشابه
B4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملسنتز نانوکامپوزیتهای TiB2-B4C به روش مکانوشیمیایی
در این پژوهش، امکان سنتز نانوکامپوزیتهای TiB2-B4C به روش مکانوشیمیایی در سیستم B-C-Ti مورد مطالعه قرار گرفت. مخلوط این پودرها در نسبت استوکیومتری مشخص توزین شده و در مدت زمانهای 6، 10، 14، 20، 26، 32، 50 و 70 ساعت مورد فرآیند آسیاکاری قرار گرفت. به منظور تکمیل واکنشها نمونهها در دمای °C 800 تا °C1200 به مدت 1 ساعت مورد عملیات حرارتی قرار گرفتند. مطالعات مورفولوژیکی توسط میکروسکوپ الکترونی ر...
متن کاملCo-Dispersion Behavior of ZrB2–SiC–B4C–C Powders with Polyethyleneimine
The aqueous dispersion behavior of ZrB₂, SiC powders with B₄C and C as sintering aids was investigated. Well co-dispersed suspension can be obtained in acidic solutions in presence of polyethyleneimine (PEI). The adsorption of PEI on the powder surface was measured by thermal gravimetric (TG) analysis. Rheological measurements displayed the effect of dispersant on the flow behavior of as-prepar...
متن کاملMechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder
Boron carbide is one of the hardest materials. The combustion method was used to synthesize B4C-TiB2 nanocomposite powder in a B2O3-Mg-TiO2-C system. An experimental study of the formation of B4C–TiB2 nanoparticles was conducted in the thermal explosion mode. A mixture of B2O3:TiO2:Mg:C at a molecular ratio of 3:1:12:1 was chosen to obtain the B4C–TiB2. This powder mixture was milled for differ...
متن کاملEffect of Ceramic Content on the Compression Properties of TiB2-Ti2AlC/TiAl Composites
In situ synthesized TiB2-reinforced TiAl composites usually possess high strength. However, it is very expensive to use B powder to synthesize TiB2 particles. Moreover, the strength enhancement of TiB2/TiAl composite is generally at the cost of plasticity. In this study, in situ dual reinforcement TiB2-Ti2AlC/TiAl composites were fabricated by using B4C powder as the B and C source, which great...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Letters on Materials
سال: 2019
ISSN: 2218-5046,2410-3535
DOI: 10.22226/2410-3535-2019-1-11-16