Microstructural features induced by spray forming of a ternary Pb-Sn-Sb alloy
نویسندگان
چکیده
منابع مشابه
CYCLIC POTENTIODYNAMIC POLARIZATION STUDY OF TERNARY PB -SN-CA ALLOY IN 2M H_2SO_4 SOLUTION
In this paper redox reaction processes and phase, formation on ternary Pb-2Sn-0.08Ca alloy utilized as insoluble lead anodes in copper electro winning cells, were investigated in 2M H__2SO__4 electrolytes, using cyclic voltammetry technique (CVA). A potential range between - 1.3V to 2.6V was chosen at various scan rates in order to study the anodic behavior and phase composition of the oxide la...
متن کاملX-Ray Photoelectron Spectroscopy Study of Passive Layers Formed on Pb-Sn and Pb-Sb Alloys
In this article, passivated Pb-Sn and Pb-Sb alloys with different compositions were studied by X-ray photoelectron spectroscopy (XPS). The passive films were found to have a double-layer structure. Both Sn and Sb were found to play an important role during the growth of passive film, which resulted in different compositions of passive filJ;l1s. The Pb oxides, Pb sulfate, SnlSb oxides, and Pb-Sn...
متن کاملThe Kinetics of Formation of Ternary Intermetallic Alloys in Pb-Sn and Cu-Ag-Sn Pb-free Electronic Joints
A simple model of the formation of Au0.1Ni0.1Sn0.8 in Pb-Sn solder/Ni interconnects is examined by numerical simulation. Previous experimental observation has shown that after reflow the interface consists of the Ni3Sn4 alloy between Pb-Sn solder and Ni, with Au distributed through the PbSn solder ball. Au0.1Ni0.1Sn0.8 was observed to form at the Pb-Sn solder/Ni3Sn4 interface during annealing a...
متن کاملSelf-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion
A Pb-62% Sn two-phase eutectic alloy was processed by high-pressure torsion (HPT) and stored at room temperature (RT) to investigate the occurrence of self-annealing. The microstructural characteristics and mechanical properties were recorded during self-annealing using scanning electron microscopy, tensile testing and nanoindentation. Processing by HPT produces a weakening effect but storage a...
متن کاملWorkability study in near-pritectic Sn-5%Sb lead-free solder alloy processed by severe plastic deformation
Prediction of the deformation characteristics is an important step to understand the workability of alloys during imposing large strains. In this research, severe plastic deformation of Sn-5Sb solder alloy was carried out under different t deformation conditions, including the temperature range of 298, 330, 36, 400 K and die designs. The current study applies an experimentally validated finite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2000
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02706544