Microstructural Evolution in an Al-1.7 at%Cu Alloy Deformed by Equal-Channel Angular Pressing
نویسندگان
چکیده
منابع مشابه
Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملMicrostructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing
A spray-cast Al-7034 alloy was processed by equal-channel angular pressing (ECAP) to a total of 8 passes at 473 K and the pressed samples were examined using transmission electron microscopy, differential scanning calorimetry and electron back-scatter diffraction. It is shown that the grain size of the alloy is reduced to ~0.3 μm by ECAP and the high pressures associated with ECAP lead to a fra...
متن کاملDissolution of the θ′ Precipitates in an Al-1.7at.%Cu Alloy Deformed by Equal-Channel Angular Pressing+
The microstructural evolution during the equal channel angular (ECA) pressing process of an α+ θ′ two-phase Al-1.7at.%Cu alloy has been studied by transmission electron microscopy (TEM) and energy-filtered transmission electron microscopy (EF-TEM). The θ′ precipitates are fragmented into fine particles after a few passes of ECA perssing. The θ′ precipitates are almost completely dissolved after...
متن کاملMICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS OF AlSiMnFe ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
V.A. Andreyachshenko, Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda, Kazakhstan A.B. Naizabekov, Mining and Metallurgy Faculty, Rudny Industrial Institute, Rudny, Kazakhstan In the present research, equal channel angular pressing (ECAP) was conducted. The defectness degree of the alloy for one pass and maximum strain was determined. Ultra fine grained...
متن کاملSize effect in equal channel angular pressing (ECAP) process
The influence of the sample size (diameter while keeping the length constant) in equal channel angular pressing (ECAP) of pure aluminum is examined using finite element method (FEM) and experiment. Different sized aluminum rods were processed via ECAP and the effect of sample size on the strain homogeneity, process load, and the ratio of the friction to the total force were evaluated. The resul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1999
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.40.938