Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics
نویسندگان
چکیده
منابع مشابه
Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation
The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...
متن کاملEffect of Interface Structure on the Microstructural Evolution of Ceramics
The interface atomic structure was proposed to have a critical effect on the microstructure evolution during sintering of ceramic materials. In liquid-phase sintering, spherical grains show the normal grain growth behavior without exception, while angular grains often grow abnormally. The coarsening process of spherical grains with a disordered or rough interface atomic structure is diffusion-c...
متن کاملHIGH TEMPERATURE ELASTIC STRAIN EVOLUTION IN Si3N4-BASED CERAMICS
Tension experiments in vacuum were performed on a monolithic Si3N4 sample at 1375°C and a 20Vol% SiCp-Si3N4 composite sample at 1400°C using the new SMARTS diffractometer at the Los Alamos Neutron Science Center. The deep penetration of neutrons facilitated these in-situ studies. In particular, the hkl-dependent strains were measured and the results interpreted by Eshelby-based modeling for the...
متن کاملModeling of the microstructural evolution and lifetime prediction of MCrAlX coatings on Nickel based superalloys in high temperature oxidation
MCrAlY coatings are deposited onto superalloys to provide oxidation and corrosion protection at high temperature by the formation of a thermally grown oxide scale. In this project, the oxidation behaviour of a HVOF CoNiCrAlYSi coating on IN792 was studied for both isothermal oxidation (900, 1000 and 1100 °C) and thermal cycling (100-1100 °C). The microstructural evolution of the CoNiCrAlYSi coa...
متن کاملMicrostructural Design of Toughened Ceramics
The fracture toughness of ceramics can be improved by the incorporation of a variety of discontinuous, elastic reinforcing phases that generate a crack-bridging zone. Recent models of toughening by crack-bridging processes are discussed and used to describe the behavior observed in whisker-reinforced ceramics. The toughening response in ceramics reinforced with other types of discontinuous rein...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2011
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2011.03.035