Microstructural Evaluation of ZrB<sub>2</sub>/ZrO<sub>2</sub> Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
نویسندگان
چکیده
منابع مشابه
Microstructural Characterization of Calcite-Based Powder Materials Prepared by Planetary Ball Milling
In this work, a planetary ball milling was used to modify the surface properties of calcite-based material from waste oyster shell under the rotational speed of 200-600 rpm, grinding time of 5-180 min and sample mass of 1-10 g. The milling significantly changed the microstructural properties of the calcite-based minerals (i.e., surface area, pore volume, true density, and porosity). The surface...
متن کاملSynthesis of HfB2 Powders by Carbothermal Reduction
In this research, solid state carbothermal synthesis of HfB2 Nano powders was investigated. For this purpose, HfO2,H3BO3, carbon active or phenolic resin were used as raw materials for carbothermal reaction. After 2-4 hours of milling the raw materials by a planetary ball in an ethanol media, the mixture was heat dried and pressed in to disks under pressure of 20-30 bar. The disks were then pla...
متن کاملThe crystallization process of amorphous Al80Fe20 alloy powders prepared by ball milling
The amorphous-to-crystalline transition during thermal annealing of amorphous Al80Fe20 alloy powders prepared by ball milling was investigated by means of magnetothermal analysis and X-ray diraction. Following structural relaxation and stress relief processes, a metastable phase precipitates during primary crystallization, and a mixture of intermetallic compound (h-Al13Fe4) and fcc Al is devel...
متن کاملApplication of Ultrasonic Assisted Machining Technique for Glass-Ceramic Milling
In this study, ultrasonic assisted machining (UAM) technique is applied in side-surface milling experiment for glass-ceramic workpiece material. The tungsten carbide cutting-tool with diamond coating is used in conjunction with two kinds of cooling/lubrication mediums such as water-soluble (WS) cutting fluid and minimum quantity lubricant (MQL). Full factorial process parameter combinations on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KONA Powder and Particle Journal
سال: 2017
ISSN: 0288-4534,2187-5537
DOI: 10.14356/kona.2017002