Microstructural design of textile composites

Models for Textile Composites Forming

INTRODUCTION Drape of dry fabrics or prepregs was recognised as an important feature in composites forming operations from the start. In the 1950s the first mathematical models were developed based on purely kinematic arguments. The assumption of zero fibre strains and trellis deformations led to the socalled fishnet approach. Typically, these methods require certain arbitrary constraints to re...

Handbook of Analytical Methods for Textile Composites

Friction in Textile Thermoplastic Composites Forming

A previously developed mesoscopic friction model for glass/PP textile composite laminates during forming is evaluated for glass and carbon/PPS laminates, at higher temperatures and lower viscosities than before. Experiments were performed for tool/ply and ply/ply configurations in a new friction test set-up. The experimental results indicate that this contact is indeed in the hydrodynamic regim...

“Solar and Thermal Energy Harvesting Textile Composites

Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this coll...

Microstructural Design of Toughened Ceramics

The fracture toughness of ceramics can be improved by the incorporation of a variety of discontinuous, elastic reinforcing phases that generate a crack-bridging zone. Recent models of toughening by crack-bridging processes are discussed and used to describe the behavior observed in whisker-reinforced ceramics. The toughening response in ceramics reinforced with other types of discontinuous rein...