Microstructural deformation mechanisms of unsaturated granular soils
نویسندگان
چکیده
منابع مشابه
Microstructural Investigation of Deformation and Failure Mechanisms in Polypropylene
The automotive industry continues to expand its use of polymeric materials, which provide more cost effective, strength and durability than metals or ceramics. Thus, a better understanding of the mechanical behavior and microstructural characterization of polymers is essential to develop their improved strength and toughness. This paper describes the deformation and fracture study of commercial...
متن کاملEstimation of Water Retention Curve for Unsaturated Fine Soils
In order to obtain the soil water retention curve of an unsaturated soil which is defined as the relationship between water content and suction, extensive laboratory tests are essential. These laboratory tests are usually costly and time consuming. Moreover, for most practical problems, it has been found that approximate unsaturated soil properties are adequate for analysis. Thus, empirical pro...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملMicrostructural characteristics of planar granular solids
The microstructure of granular materials is the main factor determining their macroscopic behaviour. We study systematically the statistical characteristics of volume elements (called quadrons) of microstructures of monoand polydisperse planar disc packs granular and report a number of new results. The packs analysed were of different intergranular friction coefficients ,μ , contained about 20,...
متن کاملMicrostructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation
The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Numerical and Analytical Methods in Geomechanics
سال: 2002
ISSN: 0363-9061,1096-9853
DOI: 10.1002/nag.206