Microstructural characterization of Pu-Zr fuels
نویسندگان
چکیده
منابع مشابه
Microstructural Characterization of Carburized Steels
*Member of ASM International arburizing has been a popular method for obtaining a unique balance of properties in steels for many years. Steels with low carbon contents are characterized by good toughness and good ductility, but low strength and low wear resistance. By locally increasing the carbon content at the surface, followed by heat treatment to produce a very high hardness in this layer ...
متن کاملMicrostructural evolution of body-centered cubic structure related Ti–Zr–Ni phases in non-stoichiometric Zr-based Zr–Ti–Mn–V–Ni hydride electrode alloys
Non-stoichiometric Zr-based alloys were prepared, and the corresponding electrochemical properties were characterized as hydride electrode alloys. The microstructure and chemical composition of non-stoichiometric Zr–Ti–Mn–V–Ni hydride electrode alloys were systematically investigated by x-ray Rietveld refinement, transmission electron microscopy (TEM), and energy dispersive spectroscopy under T...
متن کاملCharacterization of Fossil and Renewable Fuels
1Department of Applied Chemistry, China University of Mining and Technology, Xuzhou 221116, China 2Department of Chemical & Petroleum Engineering, University of Wyoming, Laramie, WY 82071, USA 3Fuels and Energy Technology Institute, Curtin University, Bentley, WA 6102, Australia 4Bioscience Division, Los Alamos National Laboratory, Los Alamos, NM 87545, USA 5State Key Laboratory of Heavy Oil Pr...
متن کاملMicrostructural characterization of next generation nuclear graphites.
This article reports the microstructural characteristics of various petroleum and pitch based nuclear graphites (IG-110, NBG-18, and PCEA) that are of interest to the next generation nuclear plant program. Bright-field transmission electron microscopy imaging was used to identify and understand the different features constituting the microstructure of nuclear graphite such as the filler particl...
متن کاملEffect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2017
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927617011680