Microstructural Characterization and Tensile Behavior of Rutile (TiO2)-Reinforced AA6063 Aluminum Matrix Composites Prepared by Friction Stir Processing
نویسندگان
چکیده
منابع مشابه
Effects of Process Parameters of Friction Stir Processing on Tensile Strength of AA6063 Aluminum Alloy
In this investigation, the effect of friction stir processing (FSP) parameters such as rotational speed, traverse speed and plunge depth on the tensile strength of AA6063 aluminum alloy was studied. The experiments were carried out as per response surface methodology parametric design concepts to study the influence of various combinations of process parameters. Statistical optimization techniq...
متن کاملExperimental Investigations on Microstructural and Mechanical Behavior of Friction Stir Welded Aluminum Matrix Composite
The welding of materials by applying Friction Stir Welding technique is a new solid-state joining technique. The main advantage of this method compared to the traditional joining process is that it minimizes problem-related to metal resolidification as the method incorporates no melting phase. In this experimental work, the effect of friction stir welding (FSW) technique on the microstructu...
متن کاملCharacterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing
Surface composite layers were successfully fabricated on an A 1050-H24 aluminum plate by dispersed iron (Fe) and magnetite (Fe₃O₄) particles through friction stir processing (FSP). Fe and Fe₃O₄ powders were packed into a groove of 3 mm in width and 1.5 mm in depth, cut on the aluminum plate, and covered with an aluminum sheet that was 2-mm thick. A friction stir processing (FSP) tool of square ...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites Part I: Microstructural characterization
In the present work traditional ingot metallurgy plus rapid solidification techniques were used to in situ produce Al-TiC composites with refined microstructures and enhanced dispersion hardening of the reinforcing phases. Microstructural characterization of the experimental materials were comprehensively done by optical, electron microscopy and X-ray diffraction. The results show that the in s...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Sinica (English Letters)
سال: 2018
ISSN: 1006-7191,2194-1289
DOI: 10.1007/s40195-018-0806-5