Microstructural characterization and interactions in Ti- and TiH2-hydroxyapatite vacuum sintered composites
نویسندگان
چکیده
منابع مشابه
Spark Plasma Sintered Hydroxyapatite – Zirconia Composites: Structural and Mechanical Properties
Hydroxyapatite (Ca10(PO4)6(OH)2) (HAp) is a very attractive material for human tissue implantation, beacuse it makes up ~69% of the weight of bone [1]. Unfortunately HAp posses low mechanical properties (strength, fracture toughness), which is a barrier to its applications in load-bearing situations [2]. The mechanical properties of HAp composites, is based on the synthesis of composites and th...
متن کاملModelling and Microstructural Characterization of Sintered Metallic Porous Materials
This paper presents selected characteristics of the metallic porous materials produced by the sintering of metal powders. The authors focus on materials produced from the iron powder (Fe) of ASC 100.29 and Distaloy SE. ASC 100.29 is formed by atomization and has a characteristic morphology. It consists of spherical particles of different sizes forming agglomerates. Distaloy SE is also based on ...
متن کاملSynthesis and Characterization of Hydroxyapatite/chitosan Composites
Hydroxyapatite (HAp)/chitosan (CS) composites were synthesized via a one-step coprecipitation method from aqueous solution, with the use of calcium chloride (CaCl2) and disodium hydrogen phosphate (Na2HPO4). CS was obtained via partial deacetylation of chitin with the use of strong sodium hydroxide solution. Composites were prepared with various HAp/CS ratios (30/70, 50/50, 70/30, 85/15) for co...
متن کاملPhase and Microstructural Correlation of Spark Plasma Sintered HfB2-ZrB2 Based Ultra-High Temperature Ceramic Composites
Abstract: The refractory diborides (HfB2 and ZrB2) are considered as promising ultra-high temperature ceramic (UHTCs) where low damage tolerance limits their application for the thermal protection system in re-entry vehicles. In this regard, SiC and CNT have been synergistically added as the sintering aids and toughening agents in the spark plasma sintered (SPS) HfB2-ZrB2 system. Herein, a nove...
متن کاملCharacterization of In-Situ Cu–TiH2–C and Cu–Ti–C Nanocomposites Produced by Mechanical Milling and Spark Plasma Sintering
This study focuses on the fabrication and microstructural investigation of Cu–TiH2–C and Cu–Ti–C nanocomposites with different volume fractions (10% and 20%) of TiC. Two mixtures of powders were ball milled for 10 h, consequently consolidated by spark plasma sintering (SPS) at 900 and 1000 ◦C producing bulk materials with relative densities of 95–97%. The evolution process of TiC formation duri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2006
ISSN: 1516-1439
DOI: 10.1590/s1516-14392006000100013