MICROSTRUCTURAL AND TRANSIENT THERMAL ANALYSIS OF TIG WELDED JOINT SAE 2205 WITH AISI 304 WITH AISI 308 FILLER METAL
نویسندگان
چکیده
منابع مشابه
Mechanical Characterization of Friction Welded AISI 304 Steels
There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...
متن کاملEffect of Heat Input on Microstructural and Mechanical Properties of AISI 304 Welded Joint Via MIG Welding
In this experimental work, AISI 304 was welded via metal inert gas (MIG) welding process with Argon (Ar) as shielding gas. In the present study, AISI 304 was subjected to different heat input using a standard 308L electrode. Weld quality i.e. ultimate tensile strength, toughness, microhardness, and microstructure of AISI 304 were examined. Microstructures of welded joints were studied using sca...
متن کاملRegression Analysis of Fatigue and Impact Strength of Shot Peened Welded Aisi 304 Austenitic
To upgrade the performance of welded joints the various improvement methods are used. Shot peening is one of the improvement method used to strengthen the properties of welded joints. GMAW process is very well suited for welding of AISI 304 austenitic stainless steels. Regression analysis is the statistical modeling technique, and it is suitable for the majority of predicting problems. It is va...
متن کاملMicrostructural Properties of Semisolid Welded Joints for AISI D 2 Tool Steel
The aim of this study is to investigate experimentally the microstructural evolution of the joints using ledeburitic AISI D2 Tool Steel parts. The application of a new process of the semisolid joining of two parts of AISI D2 cold-work tool steel is proposed using a partial remelting method. Samples were heated in an argon atmosphere up to 1300°C and held for 10 minutes. Metallographic analyses ...
متن کاملMechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels
In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering Technologies and Management Research
سال: 2020
ISSN: 2454-1907
DOI: 10.29121/ijetmr.v4.i10.2017.101