Microstructural and Micromechanical Characterization of Modified Urea-Formaldehyde Resin Penetration into Wood
نویسندگان
چکیده
منابع مشابه
Microstructural and Micromechanical Characterization of Modified Urea-Formaldehyde Resin Penetration into Wood
Characterization of the adhesive penetration behavior in wood is highly desired for optimizing the manufacturing processes and product properties. In this study, modified urea-formaldehyde (UF) adhesive was used to prepare glued laminated timber (Cryptomeria fortunei Hooibrenk). The depth of gross penetration was measured by fluorescence microscopy (FM), which showed the UF passed through 1.5 t...
متن کاملRattan Cane Modified with Polyethylene Glycol Melamine-Urea-Formaldehyde Resin
To effectively improve the strength of Plectocomia pierreana rattan cane without reducing its toughness, the cane was impregnated with a new water-soluble melamine-urea-formaldehyde (MUF) resin modified with low-molecular-weight polyethylene glycol (PEG), marked as PMUF. The PMUF synthetic process was optimized using an orthogonal test L9(3). Results showed that the dimensional stability, densi...
متن کاملMelamine-modified urea formaldehyde resin for bonding particleboards
For the development of a cost-effective melamine-modified urea formaldehyde resin (MUF), the study evaluated the effects of reaction pH and melamine content on resin properties and bond performance of the MUF resin adhesive systems. Eight resins, each with three replicates, were prepared in a factorial experiment that included two formulation variables: two reaction pHs (i.e., 4.5 and 8.0) and ...
متن کاملSynthesis, Characterization and Composites from Resorcinol-urea-formaldehyde-casein Resin
condensation reaction of urea, casein and formaldehyde in the presence of varying proportion of resorcinol under alkaline condition. All the prepared resins were characterized by free-formaldehyde content, free-phenol content, viscosity measurements and infrared spectroscopy (IR). The resin samples were cured isothermally at 120oC using two different curing agents, p-toluene sulphonic acid (PTS...
متن کاملstudying thermal behavior and formaldehyde emission of modified urea formaldehyde resin by furfural
there are adequate sources for wood adhesives, but scarcity of oil resources can affect the cost and future availability of oil based resins. for avoiding of this process, seeking for feasibility of replacement of these oil feedstocks is necessary. in present work, thermal behavior of urea formaldehyde resin modified by furfural was investigated. the thermo-gravimetry was used for this purpose,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2015
ISSN: 1930-2126
DOI: 10.15376/biores.11.1.182-194