Micromechanical Modeling of Ferrite-Pearlite Steels Using Finite Element Unit Cell Models.
نویسندگان
چکیده
منابع مشابه
Divorced Pearlite in Steels
Steels containing large carbon concentrations are used particularly when a large hardness is required, for example in the manufacture of components such as bearings. This, however, makes it difficult to shape or machine the alloys during the process of component manufacture unless they are first heat–treated into a softened condition. One method of achieving this economically is to generate a m...
متن کاملQuantitative measuring of pearlite in carbon steels using electromagnetic sensor
Non-destructive Eddy current (EC) technique has long been used to detect discontinuities in materials. Recently, its application has been extended to characterize materials microstructure. In order to identify different microstructures, four plain carbon steel bars with different chemical compositions (AISI 1015, 1035, 1045 and 1080) were used in annealed condition. The pearlite percentage, car...
متن کاملNonlinear Modeling of E-Type Ferrite Inductors Using Finite Element Analysis in 2D
We present here a modeling procedure for inductors with an E-shaped ferrite core valid for calculating the inductance of an equivalent circuit from the linear operating region to the saturation region. The procedure was developed using Finite Elements in 2D. We demonstrate that using a 2D section of the real core the results obtained are similar to the real ones, which solves the problem of con...
متن کاملFinite Element Modelling of Compaction for Textile Reinforcements Using Automatically Generated Unit Cell Models
This paper describes finite element analysis of compaction for dry textiles during preform manufacture. The models are generated using procedures encompassed in our TexGen textile modeling schema. Meshing and material property allocations are performed automatically, including definition of material orientations for each of the elements. Tow elements are modeled using a transverse isotropic mod...
متن کاملPrediction of Creep Stiffness of Asphalt Mixture with Micromechanical Finite-Element and Discrete-Element Models
This study presents micromechanical finite-element FE and discrete-element DE models for the prediction of viscoelastic creep stiffness of asphalt mixture. Asphalt mixture is composed of graded aggregates bound with mastic asphalt mixed with fines and fine aggregates and air voids. The two-dimensional 2D microstructure of asphalt mixture was obtained by optically scanning the smoothly sawn surf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2000
ISSN: 0915-1559
DOI: 10.2355/isijinternational.40.1170