Micromechanical Modeling of Ductile Crack Initiation Behavior of Two Phase Steels.
نویسندگان
چکیده
منابع مشابه
Dynamic Crack Initiation in Ductile Steels
The goal of the work presented here is to study dynamic crack initiation in ductile steels "NiÐCr steel and 293 stainless steel# at di}erent loading rates and to establish appropriate dynamic failure criteria[ A variety of infrared and visible optical methods and high!speed photography are used in this study[ Precracked steel specimens are subjected to dynamic three!point bend loading by impact...
متن کاملsynthesis of platinum nanostructures in two phase system
چکیده پلاتین، فلزی نجیب، پایدار و گران قیمت با خاصیت کاتالیزوری زیاد است که کاربرد های صنعتی فراوانی دارد. کمپلکس های پلاتین(ii) به عنوان دارو های ضد سرطان شناخته شدند و در شیمی درمانی بیماران سرطانی کاربرد دارند. خاصیت کاتالیزوری و عملکرد گزینشی پلاتین مستقیماً به اندازه و- شکل ماده ی پلاتینی بستگی دارد. بعضی از نانو ذرات فلزی در سطح مشترک مایع- مایع سنتز شده اند، اما نانو ساختار های پلاتین ب...
High Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملThree-dimensional finite element modeling of ductile crack initiation and propagation
A crack initiation and propagation algorithm driven by non-local ductile damage is proposed in a three-dimensional finite strain framework. The evolution of plastic strain and stress triaxiality govern a non-local ductile damage field via constitutive equations. When the damage reaches a critical threshold, a discontinuity in the form of a crack surface is inserted into the three-dimensional co...
متن کاملFatigue-Crack Propagation Behavior of Ductile/Brittle Laminated Composites
A study has been made of the fatigue-crack propagation properties of a series of laminated Nbreinforced Nb3Al intermetallic-matrix composites with varying microstructural scale but nominally identical reinforcement volume fraction (20 pct Nb). It was found that resistance to fatigue-crack growth improved with increasing metallic layer thickness (in the range 50 to 250 mm) both in the crack-divi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2001
ISSN: 0915-1559
DOI: 10.2355/isijinternational.41.76