Micromechanical fatigue testing
نویسندگان
چکیده
منابع مشابه
Fatigue Testing
Fatigue is the progressive, localized, permanent structural change that occurs in materials subjected to fluctuating stresses and strains that may result in cracks or fracture after a sufficient number of fluctuations. Fatigue fractures are caused by the simultaneous action of cyclic stress, tensile stress and plastic strain. If any one of these three is not present, fatigue cracking will not i...
متن کاملFatigue Damage Evolution in Silicon Films for Micromechanical Applications
In this paper we examine the conditions for surface topography evolution and crack growth/fracture during the cyclic actuation of polysilicon microelectromechanical systems (MEMS) structures. The surface topography evolution that occurs during cyclic fatigue is shown to be stressassisted and may be predicted by linear perturbation analyses. The conditions for crack growth (due to pre-existing o...
متن کاملStructure-Property Investigations via SEM In-Situ Micromechanical Testing
Small-scale in-situ testing within the SEM can be used to study deformation behavior in materials, providing some of the most compelling insights into mechanisms that govern mechanical properties. In-situ microand nanomechanical tests conducted on well-shaped specimens provide information about a full suite of properties of interest (e.g. yield phenomena, strength, ductility, modulus, work hard...
متن کاملFatigue testing median sternotomy closures.
OBJECTIVE Sternal dehiscence is commonly due to wire cutting through bone. With a biological model, we measured the rate of cutting through bone, of standard steel wire closure, peristernal steel wire, figure-of-eight closure, polyester and sternal bands sternotomy closure techniques. METHODS Polyester, figure-of-eight, peristernal and sternal band closures were tested against standard closur...
متن کاملPower wheelchair range testing and energy consumption during fatigue testing.
The range of a power wheelchair depends on many factors including: battery type, battery state, wheelchair/rider weight, terrain, the efficiency of the drive train, and driving behavior. The purpose of this study was to evaluate the feasibility of three methods of estimating power wheelchair range. Another significant purpose was to compare the current draw on pavement to current draw on an Int...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Mechanics
سال: 1993
ISSN: 0014-4851,1741-2765
DOI: 10.1007/bf02322482