Microhardness and water sorption in injection-molded starch
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Conventional and high intensity halogen light effects on water sorption and microhardness of orthodontic adhesives.
OBJECTIVE To test the null hypothesis that when the equivalent total light energy is irradiated to three orthodontic adhesive resins, there is no difference between the microhardness and water sorption values regardless of the curing light sources. MATERIALS AND METHODS Samples were divided into six groups according to the combination of three orthodontic adhesives (Kurasper F, Light-Bond, Tr...
متن کاملmodeling water vapor sorption and permeability in starch-montmorillonite nanocomposite films
the aim of this study was to investigate the rate of water vapor permeability (wvp) and moisture sorption of starch-montmorillonite (mmt) nanocomposite films. the nanocomposite films were prepared using the casting method andglycerol was used as a plasticizer. the effect of glycerol concentration on wvp of the films was determined at 25°c with a relative humidity of 0-99% (inside and outside of...
متن کاملInjection Molded Millimeter-Wave Horn Array Antenna
This paper shows injection molded millimeter-wave horn array antenna for the 1-dimensional APAA(Active Phase Array Antenna). The antenna is composed of horn antennas, grooved circular waveguide polarizers, E-plane T-junctions, and E-plane bends employing dielectric waveguides. This structure makes it possible to manufacture a feed circuit and radiating elements as an integrated unit by using in...
متن کاملThermal Processing of Injection-Molded Silicon Carbide
Silicon carbide is the most important and versatile non-oxide ceramic. Powder injection molding (PIM) is a method of high-speed fabrication of complex near-net shapes of SiC and other powders. Green micro-machining (GMM) is used to extend the shaping capability of green ceramics and powder metallurgy to smaller feature sizes. Debinding—removal of organic additives—is the rate-limiting step in P...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Polymer Science
سال: 2002
ISSN: 0021-8995
DOI: 10.1002/app.10683