Microfractography of Ti and .BETA.-Ti Alloy Films Prepared by Cylindrical Magnetron Sputtering.
نویسندگان
چکیده
منابع مشابه
SURFACE STRUCTURE OF TIN/TI MULTI-LAYERED THIN FILMS DEPOSITED ONTO Ti-6Al-4V ALLOY BY MAGNETRON SPUTTERING
Ti-6Al-4V alloy attracting attention as a biomaterial features excellent mechanical properties and corrosion resistance, and super plasticity, so enables the forming of denture bases of complicated shapes. However, this alloy contains aluminum and vanadium liable to do serious harm to human bodies [1,2], so actual use will require prevention of direct contact with biological tissues. In our pre...
متن کاملCrNx Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study
CrNx (0 ≤ x ≤ 0.91) films synthesized using highpower pulsed magnetron sputtering, also known as high-power impulse magnetron sputtering (HiPIMS), have been compared with those made by conventional direct-current (dc) magnetron sputtering (DCMS) operated at the same average power. The HiPIMS deposition rate relative to the DCMS rate was found to decrease linearly with increasing emission streng...
متن کاملHigh-power impulse magnetron sputtering of Ti-Si-C thin films from a Ti3SiC2 compound target
We have deposited Ti-Si-C thin films using high-power impulse magnetron sputtering (HIPIMS) from a Ti3SiC2 compound target. The as-deposited films were composite materials with TiC as the main crystalline constituent. X-ray diffraction and photoelectron spectroscopy indicated that they also contained amorphous SiC, and for films deposited on inclined substrates, crystalline Ti5Si3Cx. The film m...
متن کاملFabrication of Pt/Ti/TiO2 Photoelectrodes by RF-Magnetron Sputtering for Separate Hydrogen and Oxygen Production
Evolution of pure hydrogen and oxygen by photocatalytic water splitting was attained from the opposite sides of a composite Pt/Ti/TiO₂ photoelectrode. The TiO₂ films were prepared by radio frequency (RF)-Magnetron Sputtering at different deposition time ranging from 1 up to 8 h and then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet-visible-near inf...
متن کاملTi-Si-C thin films produced by magnetron sputtering: correlation between physical properties, mechanical properties and tribological behavior.
Ti-Si-C thin films were deposited onto silicon, stainless steel and high-speed steel substrates by magnetron sputtering, using different chamber configurations. The composition of the produced films was obtained by Electron Probe Micro-Analysis (EPMA) and the structure by X-ray diffraction (XRD). The hardness and residual stresses were obtained by depth-sensing indentation and substrate deflect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1995
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.38.702