Microfabrication and Plating. Photolithography. Etching.
نویسندگان
چکیده
منابع مشابه
Microfabrication of Thin-Film Solar Cell Contacts Through Photolithography
Solar energy has emerged as an inexpensive and powerful means for clean energy production and draws much research interest. In particular, thinfilm solar cells often rely on the use of permanent shadow masks to pattern their front metal contacts for energy transport. However, these machined masks are not adjustable, and currently limit the scope of experimentation. In addition, the essence of f...
متن کامل3D Microfabrication Using Emulsion Mask Grayscale Photolithography Technique
Recently, the rapid development of technology such as biochips, microfluidic, micro-optical devices and micro-electromechanical-systems (MEMS) demands the capability to create complex design of three-dimensional (3D) microstructures. In order to create 3D microstructures, the traditional photolithography process often requires multiple photomasks to form 3D pattern from several stacked photores...
متن کاملDirect Recycling of Copper from Etching to Plating
In the manufacture of printed circuit boards, the copper dissolved during etching can be used to replace the copper needed for plating using a liquid ion-exchange agent. Extraction and stripping studies demonstrated the feasibility. The quality of the etchant was not affected by the presence of the ion-exchange agent. Good-quality deposits were plated from the stripping solution with a current ...
متن کاملDevelopment of Microfabrication Technology with Maskless Photolithography Device Using LCD Projector
The maskless photolithography device we developed requires no photomask, by modifying Liquid Crystal Display (LCD) projector optics from magnified to reduced projection. The second-generation device we developed produces a practical centimeter-scale micropattern by dividing a large mask pattern and divisionally exposing it synchronized with an auto-XY stage, applying it to cell micropattern and...
متن کاملMicrofabrication of 3D silicon MEMS structures using gray-scale lithography and deep reactive ion etching
Micromachining arbitrary 3D silicon structures for micro-electromechanical systems can be accomplished using gray-scale lithography along with dry anisotropic etching. In this study, we have investigated the use of deep reactive ion etching (DRIE) and the tailoring of etch selectivity for precise fabrication. Silicon loading, the introduction of an O2 step, wafer electrode power, and wafer temp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1995
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.46.784