Micro Sheet Hydroforming Process of Ultra-Thin Pure Titanium Foil
نویسندگان
چکیده
منابع مشابه
Ultra - thin Titanium Oxide Films on
Accession #s 00936, 00937,00938 Mo(112), Measured by XPS Technique: XPS Host Material: #00936: Mo(112) Dheeraj Kumar, Ming Shu Chen, and David W. Goodman) single crystal; #00937: Si02 thin film on MO(112); #00938: TiO, thin Texas A&M University, Department of Chemistl)', College Station, Texas 77842-_Wl2 film on SiO,lMo(112) (Received 26 August 2005; accepted II August 2006; published 28 Decemb...
متن کامل3D Ultrasonic Imaging for Sheet Metal Hydroforming
With fluid forming processes getting more and more common in industrial application a lot of research is carried out to analyze the forming behavior of sheet metal within these processes. In order to gather experimental information about the forming behavior of the workpiece, an imaging system is presented, that will allow determining the actual shape within the forming process. The system has ...
متن کاملthermodynamic investigation of pack aluminizing process of pure titanium
in this research, aluminizing packs containing naf and nh4cl activators were used for aluminizing of pure titanium samples at 1100 ºc. the results showed that the layers of tial3, tial2, γ-tial, α2-ti3al, and α-solid solution are formed on titanium samples in both cases. however, the weight gain and the thickness of tial3 layer in treated samples with nh4cl activator are greater than those when...
متن کاملTitanium monoxide ultra-thin coatings evaporated onto polycrystalline copper films
We evaporated polycrystalline copper thin films of thickness between 10 and 100nm on silicon substrates with their native oxide under ultra-high-vacuum conditions. Some of them were exposed to air for a period ranging from 1 day to 2 weeks. X-ray photoelectron spectroscopy (XPS) revealed a clean copper surface with a trace of oxygen. These films that were exposed to air presented oxides in the ...
متن کاملReliability analysis of tube hydroforming process
In this paper, we propose a reliability–mechanical study combination to treat the tube hydroforming process (THP). This process consists to apply an inner pressure combined to an axial displacement to manufacture the part. Our goal is the computation of the failure probability of the hydroforming process. Normally, this process is particularly complex and have to be solved numerically. There ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2014
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.626.397