Micro-Scale Modeling of Carbon-Fiber Reinforced Thermoplastic Materials
نویسندگان
چکیده
منابع مشابه
Properties of agave fiber reinforced thermoplastic composites
Biocomposites have attracted a great deal of interest in research and industry sectors because they are typically lightweight, sustainable, environmentally friendly, and their thermomechanical properties can be designed to fit specific applications by tuning of their composition. In this study, mechanical properties of natural-fiber reinforced thermoplastic composite films were explored. Thermo...
متن کاملOverview of Flax Fiber Reinforced Thermoplastic Composites
Flax fibres are oftenly used for reinforcing thermoplastic to manufacture biocomposite materials exhibiting numerous advantages such as high mechanical properties, low density and biodegradability. The mechanical properties of a biocomposite material depends on the nature and orientation of the fibres, the nature of the matrix and mainly on the adhesion between fiber and the polymer matrix. The...
متن کاملFiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملFiber Orientation in Injection Molded Long Carbon Fiber Thermoplastic Composites
A set of edge-gated and center-gated plaques were injection molded with long carbon fiber-reinforced thermoplastic composites, and the fiber orientation was measured at different locations of the plaques. Autodesk Simulation Moldflow Insight (ASMI) software was used to simulate the injection molding of these plaques and to predict the fiber orientation, using the Anisotropic Rotary Diffusion an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mechanics and Materials
سال: 2011
ISSN: 1662-7482
DOI: 10.4028/www.scientific.net/amm.146.1