Micro Pore Distribution and Specific Surface Area of Zinc Chloride Activated Carbon.
نویسندگان
چکیده
منابع مشابه
Investigation of Activation Time on Pore Size Distribution of Activated Carbon Determined with Different Methods
Three activated carbons are synthesized in a rotary reactor at different activation times. The adsorption isotherms of the samples are measured The pore size distribution of the samples is determined using combined Saito and Foley method, BJH method. An average potential function has been determined inside the cylindrical pores. The effect of activation time on the pore size distribution sample...
متن کاملStudy on Pore and Surface Development of Activated Carbon Produced from Iranian Coal in a Rotary Kiln Reactor
متن کامل
Preparation, Surface and Pore Structure of High Surface Area Activated Carbon Fibers from Bamboo by Steam Activation
High surface area activated carbon fibers (ACF) have been prepared from bamboo by steam activation after liquefaction and curing. The influences of activation temperature on the microstructure, surface area and porosity were investigated. The results showed that ACF from bamboo at 850 °C have the maximum iodine and methylene blue adsorption values. Aside from the graphitic carbon, phenolic and ...
متن کاملinvestigation of activation time on pore size distribution of activated carbon determined with different methods
three activated carbons are synthesized in a rotary reactor at different activation times. the adsorption isotherms of the samples are measured the pore size distribution of the samples is determined using combined saito and foley method, bjh method. an average potential function has been determined inside the cylindrical pores. the effect of activation time on the pore size distribution sample...
متن کاملUtilization of zinc chloride for surface modification of activated carbon derived from Jatropha curcas L. for absorbent material
The objective of this research is to produce the low-cost activated carbon from Jatropha curcas L. by chemical activation using zinc chloride ZnCl2. The effects of the impregnation ratio on the surface and chemical properties of activated carbon were investigated. The impregnation ratio was selected at the range of 1:1-10:1 for investigation. The optimum conditions resulted in an activated carb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Society of Chemical Industry, Japan
سال: 1959
ISSN: 0023-2734,2185-0860
DOI: 10.1246/nikkashi1898.62.4_509