MICRO-HARDNESS EVOLUTION OF Al-ALLOY AA 3004, PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
نویسندگان
چکیده
منابع مشابه
Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملMicrostructure and Texture Evolution of the Al-20Sn Alloy Processed by Equal-Channel Angular Pressing using RouteC
1Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior S/N, Cd. Universitaria, A.P. 70-360, Coyoacán, C.P. 04510, Mexico 2Laboratoire Procédés et Ingénierie en Mécanique et Matériaux, CNRS UMR 8006, ENSAM, 151, bd de Hôpital 75013, Paris, France 3Laboratorio de Microscopía Electrónica, Universidad Autónoma Metropolitana, Unidad Iztapalapa. San Ra...
متن کاملCharacteristics of Cavitation in a Superplastic Magnesium Az31 Alloy Processed by Equal- Channel Angular Pressing
Experiments were conducted on a magnesium AZ31 alloy to evaluate the role of cavitation in high temperature superplasticity. Samples were processed by equal-channel angular pressing (ECAP) and then pulled to failure in tension at a temperature of 623K. Similar tests were also conducted on the as-received alloy. The results show the development of significant internal cavitation in this alloy wh...
متن کاملMICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS OF AlSiMnFe ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
V.A. Andreyachshenko, Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda, Kazakhstan A.B. Naizabekov, Mining and Metallurgy Faculty, Rudny Industrial Institute, Rudny, Kazakhstan In the present research, equal channel angular pressing (ECAP) was conducted. The defectness degree of the alloy for one pass and maximum strain was determined. Ultra fine grained...
متن کاملAchieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing
Equal-channel angular pressing provides an opportunity for refining the grain structure and introducing superplastic properties in magnesium alloys. This report describes the use of this processing technique with a ZK10 (Mg–1.0 wt.% Zn–0.26 wt.% Zr) alloy. The grain structure was successfully refined from ∼12.9 to ∼5.2 m after 4 passes and superplastic elongations were observed when testing at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2013
ISSN: 1338-1156,1335-1532
DOI: 10.12776/ams.v19i4.170