منابع مشابه
Mixed-Mode Bending Method for Delamination Testing
A mixed—mode delamination test procedure was developed combining double cantilever beam (DCB) mode I loading and end-notch fixture (ENF) mode II loading on a split unidirectional laminate. By loading with a lever, a single applied load simultaneously produces mode I and mode II bending loads on the specimen. This mixed-mode bending (MMB) test was analyzed using both finite-element procedures an...
متن کاملFiber Grating Atmospheric Pressure Sensor Based on Micro-bending Characteristic
This paper proposed a new pressure sensor based on long period fiber grating resonant peak modulation through the LPFG microbending sensitivity characteristics and membrane structure with box. Research results show that: the sensor measurement is in the range of 0~0.25 MPa, the detection resolution is 0.24469 hPa/dB, LPFG resonance spectroscopy changing law and the theoretical derivation, numer...
متن کاملMicro-Raman Measurement of Bending Stresses in Micromachined Silicon Flexures
Micron-scale characterization of mechanical stresses is essential for the successful design and operation of many micromachined devices. Here we report the use of Raman spectroscopy to measure the bending stresses in deep reactive-ion etched silicon flexures with a stress resolution of 10 MPa and spatial resolution of 1 m. The accuracy of the technique, as assessed by comparison to analytical a...
متن کاملLow-Cost Micro-Assembly Machine
Recently, production demand in manufacturing industries has changed drastically from demand for high-mix, low-volume production to that for high-mix, variable-volume production. At Fujitsu, we are promoting innovative engineering through the effective use of existing equipment without the need for additional investments and by implementing the Toyota Production System. Two major themes of manuf...
متن کاملLow-loss Bending-insensitive Micro-structured optical fiber for FTTH
In this sample paper, we describe and provide a novel Microstructured optical fiber for FTTH, which has 12 holes in its cladding. The fiber has very good bending properties. The bending losses of the novel Micro-structured fibers at the conditions of 2mm bendingradius are less than 0.1 dB at 1550 nm wavelength. The typical PMD of the novel Microstructure fibers are 0.062ps/km1/2.The splice loss...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Textile Machinary Society
سال: 1951
ISSN: 1883-8715
DOI: 10.4188/transjtmsj1948.4.468