Micro Arc Oxidation of Al-4Si, Al-4Mn and Al-4Mg Binary Alloys
نویسندگان
چکیده
منابع مشابه
Oxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملZener Relaxation in Al-Li Binary Alloys
Internal friction (I.F.) and modulus measurements have been carried out as a function of temperature in order to study the Li mobility in an A1 8.1 at% Li 0.03 at% Zr alloy. The results show that the sequence of 6' and 6 precipitation can be followed through the evolution of the internal friction spectra. Two peaks appear in the internal friction spectrum. The low temperature peak Pz (450 K), h...
متن کاملDECOMPOSITION IN BINARY Al-Li ALLOYS
We have investigated the influence of aging on the morphology and phase composition of annealed Al-Li binary alloys by means of an atom probe with a multi-detection system. The influence of artifacts such as the preferential evaporation of the Li-atoms and the pile-up effects for the Al-atoms were analysed as well. Specimens of Al 2.0 wt%Li andAl -2.9 wt%Li were solution treated and aged at 190...
متن کاملMicrostructure of Al-Zn and Zn-Al Alloys*
The change of microstructure of the title alloys with concentration, temperature and applied thermal treatment was studied in situ by XRD. The alloys, having the Zn atomic fraction, x(Zn), from 0.03 to 0.62, were subjected to: (i) rapid quenching from a temperature, Tt, higher than the solid-solution temperature, Tss, in water at RT (samples WQ); (ii) slow cooling from Tt to RT (samples SC). Th...
متن کاملMechanical Alloys in The Al-rich Part of the Al-Ti Binary System
Aluminum is commonly used as fuel additive for propellants, incendiaries, and explosives. The main limitation to its use lies in comparatively slow ignition and oxidation/combustion kinetics. Performance can be significantly improved if pure aluminum is substituted by thermodynamically less stable alloys. In this context, mechanical alloys in the aluminum-rich section of the Al-Ti binary system...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2015
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.127.1331