METHOD OF RAILWAY TRAINS VIBRATION CHARACTERISTIC DETERMINATION BASED ON FIELD MEASUREMENTS
نویسندگان
چکیده
منابع مشابه
Vibration Generated by Underground Railway Trains
The control of vibration generated by railways in tunnels is complicated by the dynamic interaction between tunnel and track. Conventional methods (floating slab track, ballast mats, under-sleeper pads) do not perform as well as might be expected and it is the purpose of this paper to explore the sources of error. The major factors which must be taken into account pertain to the three-dimension...
متن کاملfield investigation on vibration behavior of railway track systems
investigations on vibration behaviors of railway track systems were attempted in this research. this was made by conducting a comprehensive field investigation into the free vibration of track systems and response of tracks to train moving loads. in-situ modal analysis was used in a railway track field as an efficient method of investigating dynamic properties of railway track systems. natural ...
متن کاملAnalysis of Local Vibration for High-Speed Railway Bridge Based on Finite Element Method
Based on the theory of vehicle track coupling dynamics, the local vibration of the high-speed railway box girder is analyzed by the Finite Element Method and the model is simulated with the solid elements. Through the study of vibration characteristics of the selected 6 sensitive points, the local vibrations in different parts of the box girder are figured out. It is compared the response of th...
متن کاملMulti-Observations Initial Orbit Determination based on Angle-Only Measurements
A new approach with the ability to use the multiple observations based on the least square approach has been proposed for initial orbit determination. This approach considers the Earth’s Oblateness by using the developed Lagrange coefficients. The efficiency of the proposed method has been tested in two scenarios. The first scenario is to use the simulated and the second one is to utilize the r...
متن کاملDetermination of Blasthole Parameters Based on Field Results (TECHNICAL NOTE).
Correct selection of coefficients for blasthole parameters in Ghalat limestone mine in Shahr-e-kord of Iran has resulted is designing and performing 20 blasting operations. After each blast, fragmented rocks larger than one square meter, called oversize, are estimated and prepared for secondary blasting. Next blasthole pattern were designed based on previous blasting results. The results of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Akustika
سال: 2021
ISSN: 1801-9064
DOI: 10.36336/akustika202139221