Method of generating high-power microwave nanosecond pulses
نویسندگان
چکیده
منابع مشابه
Nd:YAG single-crystal fiber as high peak power amplifier of pulses below one nanosecond.
We explore the potential of Nd:YAG single-crystal fibers for the amplification of passively Q-switched microlasers operating below 1 ns. Different regimes are tested in single or double pass configurations. For high gain and high power amplification this novel gain medium provided average powers up to 20 W at high repetition rate (over 40 kHz) for a pulse duration of 1 ns. As an energy amplifie...
متن کاملDetection of nanosecond-scale, high power THz pulses with a field effect transistor.
We demonstrate detection and resolution of high power, 34 ns free electron laser pulses using a rectifying field effect transistor. The detector remains linear up to an input power of 11 ± 0.5 W at a pulse energy of 20 ± 1 μJ at 240 GHz. We compare its performance to a protected Schottky diode, finding a shorter intrinsic time constant. The damage threshold is estimated to be a few 100 W. The d...
متن کاملGeneration of High Peak and High Average Power Subnanosecond-Width 10-GHz Microwave Pulses
Excitation of 10-GHz gigawatt-range radiation pulses ~ 1 ns long in relativistic backward-wave oscillators with an elongated periodic slow-wave system has been studied. Accelerators based on a compact pulsed-periodic high-voltage generator type SINUS-160 and a generator employing an inductive energy storage, a semiconductor opening switch and a peaking hydrogen-filled spark gap have been develo...
متن کاملSimultaneous Shaping and Shortening of Nanosecond Pulses
In many fields of modem optics specially shaped optical pulses are desired. One of the most precise techniques employs a manipulation of the spatially dispersed optical frequency components ofthe incoming ultrashort laser pulses [1]. As a result, the output pulses are shaped and broadened in time. The aim of the present work is to provide evidences on the possibility [2] for a simultaneous shap...
متن کاملchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Technology audit and production reserves
سال: 2015
ISSN: 2312-8372,2226-3780
DOI: 10.15587/2312-8372.2015.37633