Method for producing low-viscosity marine fuel oil
نویسندگان
چکیده
Low-viscosity marine fuel oil that is obtained from the products of residual raw materials and middle distillate fractions intended for use in ship engines instead a diesel fuel. A real-world application this new composition great importance proposed low-viscosity created by compounding mixture distillates accordance with following parameters. The should contain vacuum fraction 420-490°C, 350-420°C straight-run 180-350°C taken certain ratios. This study presents its technical advantages over previous analogues. benefits include improvements coking properties storage stability due to pour point indicator.
منابع مشابه
Emissions tradeoffs among alternative marine fuels: total fuel cycle analysis of residual oil, marine gas oil, and marine diesel oil.
Worldwide concerns about sulfur oxide (SOx) emissions from ships are motivating the replacement of marine residual oil (RO) with cleaner, lower-sulfur fuels, such as marine gas oil (MGO) and marine diesel oil (MDO). Vessel operators can use MGO and MDO directly or blended with RO to achieve environmental and economic objectives. Although expected to be much cleaner in terms of criteria pollutan...
متن کاملبوزدایی از fuel oil deodorization of fuel oil
مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در fuel oil عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی fuel oil تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...
15 صفحه اولMarine Fuel Oil Recovery System with Induction Heating
This paper describes fundamental characteristics of high frequency induction heating applied for Marine Fuel Oil (MFO) recovery system. The system is analyzed for an induction-heating load, related to operating frequency and input power. Frequency domain characteristics of load equivalent circuit parameters in induction heating are investigated to clarify an effective circuit design of the high...
متن کاملNovel viscosity determination method: Validation and application to fuel flow
The kinematic viscosity is a major physical property to be used in numerical, experimental and analytical work in all the related fields of fluid flow research. Its determination can be based on experiments with viscometer and on calculations for single or multi-species components, possibly through the use of mixture law and other intermediate parameters. Its experimental estimation for multi-s...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202128801008