Method for load-capable path planning in multi-axis fused deposition modeling
نویسندگان
چکیده
منابع مشابه
Extruder path generation for Curved Layer Fused Deposition Modeling
Extruder path generation for a new rapid prototyping technique named “Curved Layer Fused Deposition Modeling” (CLFDM) has been presented. The prototyping technique employs deposition of material in curved layers in contrast to flat layers as in Fused Deposition Modeling (FDM). The proposed method would be particularly advantageous over FDM in the manufacturing of thin, curved parts (shells) by ...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملCentralized Path Planning for Multi-aircraft in the Presence of Static and Moving Obstacles
This article proposes a new approach for centralized path planning of multiple aircraft in presence of the obstacle-laden environment under low flying rules. The problem considers as a unified nonlinear constraint optimization problem. The minimum time and control investigate as the cost functions and the maximum velocity and power consider as the constraints. The pseudospectral method applies ...
متن کاملDual-color mixing for fused deposition modeling printers
In this work we detail a method that leverages the two color heads of recent low-end fused deposition modeling (FDM) 3D printers to produce continuous tone imagery. The challenge behind producing such two-tone imagery is how to finely interleave the two colors while minimizing the switching between print heads, making each color printed span as long and continuous as possible to avoid artifacts...
متن کاملProcess Planning for Solid Freeform Fabrication Based on Laser-Additive Multi-Axis Deposition
This paper describes a new approach for rapid prototyping based on volumetric skeletonization. Contrary to most of the popular techniques for Solid Freeform Fabrication (SSF) based on 2-1/2 -axis layering as planar slices, this approach suggests the growth of the component along all three coordinate axes. While this approach offers many advantages in terms of the elimination of the support stru...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2019
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.04.188