METHOD FOR ASSESSING SURFACE QUALITY OF COPPER CATHODES
نویسندگان
چکیده
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولCopper-Stabilized Sulfur-Microporous Carbon Cathodes for Li–S Batteries
wileyonlinelibrary.com interact with two Li atoms per S atom, the S cathode can provide reversible high capacity of 1675 mAh g -1 at average potentials of 2.0 V, [ 1–3 ] which is 10× higher energy density than that of classical commercial LiCoO 2 cathode. Since the capacity of current LiCoO 2 -graphite Li-ion battery is controlled by LiCoO 2 cathode, replacement of expensive LiCoO 2 with cheap ...
متن کاملSurvey of surface runoff quality in Zahedan for irrigation usage
Background & Aim: Urban runoff is one of the most valuable and renewable water resources in many arid and semi-arid parts of the world. Understanding how to use these resources is very important. The purpose of this study was to determine the physical, chemical and biological properties of surface runoff in Zahedan for irrigation uses. Methods: The present work was a descriptive cross-sectiona...
متن کاملDevelopment of a novel method for Copper sorption: An application of Taguchi Method
The aim of this study is to investigate the application of polypyrrole/ polyaniline (PPy/PANI) nanofiberfor Cu (II) sorption from paper mill wastewater. The tests and their optimization results were basedon the experiments design in three levels of variables using Taguchi method. The results showed thatin Copper removal tests, the pH of the solution was the most effective para...
متن کاملA simple method for improving surface quality of rapid prototype
Rapid prototyping (RP) process is inherently performed by layered manufacturing. The surface finish of the RP part is inevitably excessively rough. In this study, aluminum filled epoxy resin is used as a filler to improve surface quality of wax injection tool fabricated by fused deposition modeling. The average surface roughness of wax patterns can be drastically reduced from 1710 μm to 276 μm....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2019
ISSN: 2500-3070,0579-2991
DOI: 10.6060/ivkkt.20196202.5837