Metastable Phase Diagrams and Rapid Solidification Processing.
نویسندگان
چکیده
منابع مشابه
Kinetic Phase Diagrams of Ternary Al-Cu-Li System during Rapid Solidification: A Phase-Field Study
Kinetic phase diagrams in technical alloys at different solidification velocities during rapid solidification are of great importance for guiding the novel alloy preparation, but are usually absent due to extreme difficulty in performing experimental measurements. In this paper, a phase-field model with finite interface dissipation was employed to construct kinetic phase diagrams in the ternary...
متن کاملModeling of metastable phase formation diagrams for sputtered thin films
A method to model the metastable phase formation in the Cu-W system based on the critical surface diffusion distance has been developed. The driver for the formation of a second phase is the critical diffusion distance which is dependent on the solubility of W in Cu and on the solubility of Cu in W. Based on comparative theoretical and experimental data, we can describe the relationship between...
متن کاملMetastable phase solidification in electron beam welding of dissimilar stainless steels
Electron beam welds between dissimilar stainless steels with different solidification modes were studied with a view to elucidating the role of nucleation, cooling rate and direction of dendrite growth on the tendency towards metastable phase solidification. The results are compared with the solidification behaviour of levitation melted samples. It is demonstrated that with careful design, stai...
متن کاملRapid Solidification of Polymeric Fibers
A thorough understanding of crystallization kinetics for rapid polymer solidification during the fiber spinning process is a route to maximizing fiber properties while increasing production speeds. We are using theoretical, computational, and experimental models to characterize the crystallization process at the molecular, microscopic, and macroscopic levels. Polymer dependent molecular descrip...
متن کاملDevelopment of Metastable Solidification Structures Using the Electrospark Deposition Process
Electrospark deposition (ESD) was studied to investigate the possibility of forming non-equilibrium microstructures in Al alloy systems. The results have demonstrated that the level of supersaturation is system-dependent. The Al-10 wt% Mg system exhibited a complete supersaturation, while the Al-Si system had a supersaturation level reaching about 1wt%. The ESD process was also used to demonstr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1995
ISSN: 0915-1559
DOI: 10.2355/isijinternational.35.566