Metal–Matrix Composites from High‐Pressure Torsion with Functionalized Material Behavior

نویسندگان

چکیده

In composites, outstanding properties of two materials can be combined. particular, metal–matrix composites (MMCs) combine the a high-strength ductile metallic matrix with special embedded ceramic particles. This hybrid used to create functional material. However, during consolidation, thermal load most common MMC-processing routes is an obstacle for such functionalization, because unique phases likely degrade. Mechanical alloying, in this case, by high-pressure torsion (HPT), overcome challenge. Herein, attempt obtain smart through HPT processing aimed. For that purpose, Cu-MMCs are produced from mixed powders ZrO 2 and BaTiO 3 (BTO) challenge incorporate their phase. BTO provide sensing ability internal stress fatigue lifetime retarded crack growth. The amount stabilized phase evaluated X-ray diffraction. Cu–BTO–MMCs exhibit local piezoelectric effect when strained, shown situ scanning Kelvin probe force microscopy. Cu– –MMCs feature initiation earlier closure growth due volume expansion once transforms.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gypsum Composites with CDW as Raw Material

Abstract—In this study, the feasibility of incorporating ceramic waste from bricks (perforated brick and double hollow brick) and extruded polystyrene (XPS) waste, is analysed. Results show that it is possible to incorporate up to 25% of ceramic waste and 4% of XPS waste over the weight of gypsum in a gypsum matrix. Furthermore, with the addition of ceramic waste an 8% of surface hardness incre...

متن کامل

Torsion Effects in Elastic Composites with High Contrast

We establish a homogenization result and a corrector result for a vibration problem of elasticity. We assume that the data depend in a periodic way on a small parameter ε. We assume also that the Lamé coefficients take possibly high values in a periodical set of disconnected inclusions and take values of the order ε2 elsewhere. In the fibered case, torsional vibrations take place at an infinite...

متن کامل

Highpressure phases of NaAlH4 from first principles

Related Articles Influence of monovalent ions on density fluctuations in hydrothermal aqueous solutions by small angle X-ray scattering J. Chem. Phys. 136, 044515 (2012) Nanoscale diffraction imaging of the high-pressure transition in Fe1−xO Appl. Phys. Lett. 100, 041903 (2012) High-pressure study of tetramethylsilane by Raman spectroscopy J. Chem. Phys. 136, 024503 (2012) High-pressure optical...

متن کامل

Thermomechanical Behavior of Polymer Composites Based on Edge-Selectively Functionalized Graphene Nanosheets

In this study, we demonstrate an effective approach based on a simple processing method to improve the thermomechanical properties of graphene polymer composites (GPCs). Edge-selectively functionalized graphene (EFG) was successfully obtained through simple ball milling of natural graphite in the presence of dry ice, which acted as the source of carboxyl functional groups that were attached to ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced Engineering Materials

سال: 2023

ISSN: ['1527-2648', '1438-1656']

DOI: https://doi.org/10.1002/adem.202201565