Metallurgical Interaction among BNi-9 and Waspaloy, FSX-414 or 304-Type Stainless Steel under TLP Cycle

Compressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

Radiation-induced Segregation and Void Swelling in 304 Stainless Steel

. Void swelling and radiation-induced segregation have been measured in 304 stainless steel. Samples were irradiated in the outer regions of the EBR-11reactor where displacement rates of 2.OX10-8and 6.6 xl 0-8dpds are comparable to those in pressurized water reactor components. Samples were inadiated at temperatures from 371-390°C to total doses of up to 20 dpa. Void swelling reached a maximum ...

Corrosion Performance and Tribological Properties of Carbonitrided 304 Stainless Steel

Evolution of Microstructure and Residual Stress under Various Vibration Modes in 304 Stainless Steel Welds

Simultaneous vibration welding of 304 stainless steel was carried out with an eccentric circulating vibrator and a magnetic telescopic vibrator at subresonant (362 Hz and 59.3 Hz) and resonant (376 Hz and 60.9 Hz) frequencies. The experimental results indicate that the temperature gradient can be increased, accelerating nucleation and causing grain refinement during this process. During simulta...

Factors Affecting Friction Coating on Stainless Steel 304

Low carbon steels are widely used for structural applications because of its ease in fabrication and the moderate strength it posses. However, its pure corrosion resistance at normal atmosphere is a matter of serious concern.