Metallographic Characterization of Thermal Spray Microstructures
نویسندگان
چکیده
منابع مشابه
Characterization of thermal transport in one-dimensional microstructures using Johnson noise electro-thermal technique
This work reports on the development of a Johnson noise electro-thermal (JET) technique to directly characterize the thermal conductivity of one-dimensional micro-/nanoscale materials. In this technique, the to-bemeasured micro-/nanoscale sample is connected between two electrodes and is subjected to steady-state Joule heating. The average temperature rise of the sample is evaluated by simultan...
متن کاملThermal Spray Coatings
THERMAL SPRAY is a generic term for a group of processes in which metallic, ceramic, cermet, and some polymeric materials in the form of powder, wire, or rod are fed to a torch or gun with which they are heated to near or somewhat above their melting point. The resulting molten or nearly molten droplets of material are accelerated in a gas stream and projected against the surface to be coated (...
متن کاملVision-aided Monitoring & Control of Thermal Spray, Spray
Vision is one of the most powerful forms of non-contact sensing for monitoring and control of manufactusang processes. However, processes involving an arc plasma or flame such as welding or thermal spraying pose particularly challenging problems to conventional vision sensing and processing techniques. The arc or plasma is not typically limited to a single spectral region and thus cannot be eas...
متن کاملThermal Response Variability of Random Polycrystalline Microstructures
A data-driven model reduction strategy is presented for the representation of random polycrystal microstructures. Given a set of microstructure snapshots that satisfy certain statistical constraints such as given low-order moments of the grain size distribution, using a non-linear manifold learning approach, we identify the intrinsic low-dimensionality of the microstructure manifold. In additio...
متن کاملComprehensive Thermal Modeling of ElectroThermoElastic Microstructures
Bent and folded beam configurations have been popularly used in electrothermoelastic (E-T) actuation. This paper introduces new designs of thermal end-effector with micro-grasping and micro-heating capabilities. We obtained analytical models for all possible steady state temperature responses of suspended and overhanging microstructures that constitute bent beam, folded beam, and combined actua...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2006
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927606065834