Metalized Base for Coatings-Flame-Sprayed Aluminum, Zinc Tested in Sea Water
نویسندگان
چکیده
منابع مشابه
Microstructure and Microwave Absorption Properties of Flame Sprayed Ceramic Coatings
In this research work, airplane grade aluminum alloy substrate was coated by Al2O3/ TiO2 ceramic coatings in two different compositions as 50:50 and 87:13 using Flame spraying technique. The surface & cross-sectional morphological characterizations of the Al2O3/ TiO2 powders and coatings were performed by scanning electron microscopy (SEM). The microwave absorbing properties of coatings were ex...
متن کاملProcessing and Characterisation of High-velocity Suspension Flame Sprayed (hvsfs) Bioactive Glass Coatings
The High-Velocity Suspension Flame Spraying (HVSFS) technique was employed in order to deposit bioactive glass coatings onto titanium substrates. Two different glass compositions were examined: the classical 45S5 Bioglass and a newly-developed SiO2–CaO–K2O–P2O5 glass, labelled as “Bio-K”. Suitable raw materials were melted in a furnace and fritted by casting into water. The frit was dry-milled ...
متن کاملSolid Particle Erosion of Thermal Sprayed Coatings
Solid particle erosion is an important material degradation mechanism. Although various methods of coating are tried and used for protection against erosion, thermal sprayed coating for such purpose is the most widely used method. In this chapter, evolution of thermal sprayed coating, erosion testing methods, and erosive wear of thermal sprayed coatings are discussed extensively with emphasis o...
متن کاملA Review on Detonation Gun Sprayed Coatings
Materials are precious resources. Different methods are employed to protect the material from degradation. Thermal spraying is one of the most effective method to protect the material from wear, high temperature corrosion, stresses and erosion, thus increasing the life of material in use. Detonation gun spraying is one of the thermal spraying techniques known for providing hard, wear resistant ...
متن کاملNew Mechanical Pretreatment Process for Thermally Sprayed Aluminum Crankcases
INTRODUCTION The increasing demand for vehicles with reduced fuel consumption and emission is the reason why the material aluminum is frequently used for crankcases in the automotive industry. A method to increase the wear resistance of the cylinder bore surface is to use hyper-eutectic cylinder liners, which are cast-in or are assembled by force fitting. Another possibility to improve the trib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING DIGEST
سال: 1968
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1954.17.3_120