Metal-supported solid oxide fuel cells operating with reformed natural gas and sulfur

A Reversible Planar Solid Oxide Fuel-Fed Electrolysis Cell and Solid Oxide Fuel Cell for Hydrogen and Electricity Production Operating on Natural Gas/Biomass Fuels

IV.A.3 A Reversible Planar Solid Oxide Fuel-Fed Electrolysis Cell and Solid Oxide Fuel Cell for Hydrogen and Electricity Production Operating on Natural Gas/Biogas

Objectives • Develop the concept of a solid oxide fuel-fed electrolysis cell (SOFEC) for hydrogen production. • Identify and develop SOFEC cathode materials that are electrocatalytically and chemically stable in both reducing and oxidizing atmospheres. • Develop a novel concept of a composite/hybrid planar SOFEC-solid oxide fuel cell (SOFC) stack to co-generate hydrogen and electricity. • Demon...

Strategies for Lowering Solid Oxide Fuel Cells Operating Temperature

Lowering the operating temperature of solid oxide fuel cells (SOFCs) to the intermediate range (500–700 oC) has become one of the main SOFC research goals. High operating temperatures put numerous requirements on materials selection and on secondary units, limiting the commercial development of SOFCs. The present review first focuses on the main effects of reducing the operating temperature in ...

Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas

In this study, a solid oxide fuel cell (SOFC) stack has been successfully fabricated and tested by using direct natural gas. The main objective of this research was to achieve optimal long-term performance of the SOFC stack without carbon deposition by using low-cost natural gas as a fuel. The stack configuration was improved by a new interconnect design and made of cost-effective raw materials...

Operation of Thin-Film Electrolyte Metal-Supported Solid Oxide Fuel Cells in Lightweight and Stationary Stacks: Material and Microstructural Aspects

In this study we report on the development and operational data of a metal-supported solid oxide fuel cell with a thin film electrolyte under varying conditions. The metal-ceramic structure was developed for a mobile auxiliary power unit and offers power densities of 1 W/cm² at 800 °C, as well as robustness under mechanical, thermal and chemical stresses. A dense and thin yttria-doped zirconia ...