منابع مشابه
Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملIncreasing Cooling Towers Heat Capacity by Flue Gas Introduction
In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...
متن کاملIncreasing Cooling Towers Heat Capacity by Flue Gas Introduction
In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...
متن کاملCleaning of Municipal Waste Incinerator Flue Gas in Europe
The paper discusses the various methods used in Europe to reduce emissions of pollutants from the stack gases of municipal incinerators. With respect to NOx, the paper mentions two experimental postcombustion control approaches involving the addition of chemicals to the wet-scrubber system to oxidize or reduce the NOx to absorbable NO 2 or dischargeable N 2. As pointed out , these methods would...
متن کاملUtilization of Dry Calcium Based Flue Gas Desulfurization Waste as a Hazardous Waste Fixation Agent
includes materials such as waste oil, solvents, and some boiler cleaning fluids which have a heating value. There is at least one boilcleaning product that has a positive heating value. During the boiler cleaning process, the fluid is collected in a temporary storage tank, after the cleaning process is completed it is reinjected into the boiler as essentially an additional heat input to the boi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2017
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2017.03.945