Metal frame reinforced bulk metallic glass composites
نویسندگان
چکیده
منابع مشابه
Bulk metallic glass matrix composites
Composites with a bulk metallic glass matrix were synthesized and characterized. This was made possible by the recent development of bulk metallic glasses that exhibit high resistance to crystallization in the undercooled liquid state. In this letter, experimental methods for processing metallic glass composites are introduced. Three different bulk metallic glass forming alloys were used as the...
متن کاملNear-threshold fatigue crack growth in bulk metallic glass composites
A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impa...
متن کاملResidual Stresses in Tungsten / Bulk Metallic Glass Composites
Bulk metallic glasses (BMGs) have recently gained popularity due to the development of new alloys that yield a glassy structure even with “conventional” metal processing such as casting. The unique properties of BMGs potentially place them among significant engineering materials: very high strength (1.9 GPa) and fracture toughness (40-55 MPa.m), a near theoretical specific strength, excellent w...
متن کاملDeformation Mechanisms of Bulk Metallic Glass Matrix Composites
Bulk metallic glasses (BMGs) possess a unique set of mechanical properties that make them attractive structural materials: yield strength > 2 GPa, fracture toughness ~20 MPa.m and elastic strain limit ~2%. BMGs can also be cast into intricate shapes which retain their dimensional integrity and require no further machining. Unfortunately, monolithic BMGs fail catastrophically under unconstrained...
متن کاملMelt infiltration casting of bulk metallic-glass matrix composites
The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Letters
سال: 2019
ISSN: 2166-3831
DOI: 10.1080/21663831.2019.1695684