Mesoscale crystal plasticity modeling of nanoscale Al–Al2Cu eutectic alloy
نویسندگان
چکیده
منابع مشابه
Ratcheting crystal plasticity modeling in microstructure of magnesium alloy under stress-controlled cyclic tensile loading with non-zero mean stress
Todays, the requirement of lowering the vehicle weight for the reduction of the fuel consumption and emissions, one of the methods considered by designers is to use the ligh magnesium alloy under cylclic loadings. In this article, considering the microstructure of the AZ91D magnesium alloy, its crystalline structure, a model for predicting the ratcheting behavior of this alloy was adapted and v...
متن کاملMesoscale theory of grains and cells: crystal plasticity and coarsening.
Crystals with spatial variations in their axes naturally evolve into cells or grains separated by sharp walls. At high temperatures, polycrystalline grains form from the melt and coarsen with time: the dislocations can both climb and glide. At low temperatures under shear the dislocations (which allow only glide) form into cell structures. We present here a mesoscale theory of dislocation motio...
متن کاملMesoscale model of plasticity
A framework for investigating plasticity phenomena and their dependence on the underlying physical and size-dependent mechanisms is developed. The framework is based on crystal plasticity and three-dimensional discrete dislocation dynamics analyses. Particularly, the mesoscale model couples continuum crystal plasticity framework with a set of spatio-temporal evolution equations for dislocation ...
متن کاملPhysics Based-crystal Plasticity Modeling of Single Crystal Niobium
Physics Based-crystal Plasticity Modeling of Single Crystal Niobium
متن کاملHigh-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures.
High-operating-temperature direct ink writing (HOT-DIW) of mesoscale architectures that are composed of eutectic silver chloride-potassium chloride. The molten ink undergoes directional solidification upon printing on a cold substrate. The lamellar spacing of the printed features can be varied between approximately 100 nm and 2 µm, enabling the manipulation of light in the visible and infrared ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Plasticity
سال: 2019
ISSN: 0749-6419
DOI: 10.1016/j.ijplas.2019.06.008