Mercury speciation in urban landfill leachate by cold vapor generation atomic absorption spectrometry using ion exchange and amalgamation

Use of Different Gold Amalgamation Techniques in Mercury Determination by Cold Vapor Atomic Absorption Spectrometry

Determination of mercury(II) ion by electrochemical cold vapor generation atomic absorption spectrometry.

A technique for determination of mercury is described; it is based on electrolytic reduction of Hg(II) ion on a graphite cathode, the trapping of mercury vapor and its volatilization into a quartz tube aligned in the optical path of an atomic absorption spectrometer. The electrochemical cell consisted of a graphite cathode and an anode operating with constant direct current for the production o...

Determination of mercury in the urine by atomic absorption spectrometry - cold vapor technique

Urine is a liquid waste product of the body. Substances that are ingested and fail to be apsorbed are excreted, solid waste through the intestines, the urine through the kidney and ureter and another fluid from the body through perspiration. Determination of mercury content of urine is not included in routine examinations, but mercury can be present in urine at concentrations that could have se...

Determination of Total Mercury by Vapor Generation In Situ Trapping Flame Atomic Absorption Spectrometry

The analytical performance of non-chromatographic coupled hydride generation, integrated atom trap (HG–IAT) atomizer flame absorption spectrometry (FAAS) systems were evaluated for the determination of total mercury in environmental samples. Mercury, using formation of mercury vapors were atomized in air-acetylene flame-heated IAT. A new design of vapor generation integrated atom trap flame ato...

Speciation of Selenium(IV) and Selenium(VI) using Coupled Ion Chromatography—Hydride Generation Atomic Absorption Spectrometry

A simple method was developed to speciate inorganic Se in the mg L range using coupled ion chromatography-hydride generation atomic absorption spectrometry. Because of the differences in toxicity and adsorption behavior, determination of the redox states selenite, Se(IV), and selenate, Se(VI), is important. We used anion exchange chromatography to separate Se(IV) and Se(VI) based on differences...