Mercury Process of Electrodeposition
نویسندگان
چکیده
منابع مشابه
AgInSe2 thin films prepared by electrodeposition process
In this work, the one step electrodeposition process was used to prepare Ag-In-Se thin films. The films were deposited at room temperature from a bath containing 1-3x10 M AgNO3, 6x10 -2 M InCl3 and 3x10 -2 M of H2SeO3. The KSCN at a concentration of 0.681 M was used as complexing agent. The pH value of the solution was 1.4. Applied potentials to SCE were chosen between -0.3 V and -1.1 V. Films ...
متن کاملDiffusion model for the treeing process of electrodeposition experiments
We simulate a model that captures all the features of the silver electrodeposition experiment in a rectangular cell. We study the bulk of the aggregates on the basis of a treeing process (M. Matsushita, P. Meakin, Cluster size distribution of self-affine fractals, Phys. Rev. A 37 (1988) 3645; F. Romá, C.M. Horowitz, E.V. Albano, Numerical study of the development of bulk scale-free structures u...
متن کاملA Novel Electrodeposition Process for Plating Zn-Ni-Cd Alloys
Zn-Ni-Cd alloy was electrodeposited from an alkaline electrolytic bath under potentiostatic conditions. Bath analyses using a pH concentration diagram reveal that addition of a complexing agent is essential to maintain the bath stability. Introduction of a low concentration of CdSO4 reduces the anomalous nature of the Zn-Ni deposit. Deposits obtained from the electrolytic bath which contains 60...
متن کاملThermodynamic and Kinetic Aspects of Mercury Sorption on Activated Carbon in the Process of Mercury Bioreduction
A unique biotechnological method for remediation of industrial wastewater contaminated by toxic mercury, based on the enzymatic reduction of ionic mercury by live bacteria, has been developed by prof. Deckwer and co-workers at GBF (at present HZI), Germany, and implemented in a pilot-plant scale. The experience gained during operation of this installation led to the idea, that the process of bi...
متن کاملPulsed Electrodeposition of Copper
Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1969
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.42.467