Membrane Electrode Assemblies for the Polymer Electrode Fuel Cell Based on Vertically Aligned Carbon Nanotubes
نویسندگان
چکیده
منابع مشابه
Vertically-aligned carbon nanotubes on aluminum as a light-weight positive electrode for lithium-polysulfide batteries.
A light-weight, high specific surface current collector made of vertically-aligned carbon nanotubes grown on an aluminum substrate was fabricated and studied as a positive electrode in a semi-liquid lithium/polysulfide battery. This simple system delivered stable capacities over 1000 mA h gS(-1) and 2 mA h cm(-2) with almost no capacity loss over 50 cycles.
متن کاملNew Three-Dimensional Porous Electrode Concept: Vertically-Aligned Carbon Nanotubes Directly Grown on Embroidered Copper Structures
New three-dimensional (3D) porous electrode concepts are required to overcome limitations in Li-ion batteries in terms of morphology (e.g., shapes, dimensions), mechanical stability (e.g., flexibility, high electroactive mass loadings), and electrochemical performance (e.g., low volumetric energy densities and rate capabilities). Here a new electrode concept is introduced based on the direct gr...
متن کاملElectrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell
In this study, a sodalite nanozeolite was synthesized and characterized by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). Following the morphology evolution of the sodalite nanozeolite in the SEM images illustrates the formation of the spherical particle with a size between 60 and 80 nm. Then, carbon paste electrode (CPE) was modified by sodalite nanozeolite and Ni2+ ions. Th...
متن کاملFabrication of bifunctional membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells
Introduction: The conversion and storage of energy with a high efficiency, especially a high specific energy, will be an important factor in future energy storage technologies. The relatively simple possibility to store hydrogen and oxygen with high specific energy combined with high energy conversion efficiency in fuel cells and electrolyser presents an opportunity for the use of polymer elect...
متن کاملCarbon Nanotubes Supported Conducting Polymer Electrode for Supercapacitor
Supercapacitors (SCs) as portable systems and electric vehicles have aroused great interest due to their high power in short term. The composite materials of carbon nanotubes and conducting polymers have been considered for SC electrodes. Carbon nanotubes (CNTs), due to their outstanding electric properties and nanoscale texture, such as large specific area, low cost, and cycle stability, exhib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hosokawa Powder Technology Foundation ANNUAL REPORT
سال: 2010
ISSN: 2189-4663
DOI: 10.14356/hptf.08109