Melt Extrusion of Environmentally Friendly Poly(L-lactic acid)/Sodium Metabisulfite Films for Antimicrobial Packaging Applications
نویسندگان
چکیده
منابع مشابه
Chitosan based antimicrobial films for food packaging applications
Antimicrobial packaging is one of the most promising active packaging systems. Antimicrobial packaging is the packaging system that is able to kill or inhibit spoilage and pathogenic microorganisms that are contaminating foods. A tremendous effort has been made over the last decade to develop and test films with antimicrobial properties to improve food safety and shelf life. For food preservati...
متن کاملCharacterization of Current Environmentally - Friendly Films
The purpose of this study was to evaluate the physical and mechanical properties of environmentally-friendly films for fresh-cut lettuce. This objective was achieved by determining the gas transmission rates for oxygen, water vapor, carbon dioxide, and the thermal and mechanical properties of the films following ASTM standards D3985, F1249, F2476-05, D3418-03, and D882-02, respectively. Electro...
متن کاملAntimicrobial nanostructured starch based films for packaging.
Montmorillonite modified with a quaternary ammonium salt C30B/starch nanocomposite (C30B/ST-NC), silver nanoparticles/starch nanocomposite (Ag-NPs/ST-NC) and both silver nanoparticles/C30B/starch nanocomposites (Ag-NPs/C30B/ST-NC) films were produced. The nanoclay (C30B) was dispersed in a starch solution using an ultrasonic probe. Different concentrations of Ag-NPs (0.3, 0.5, 0.8 and 1.0mM) we...
متن کاملPolyethylene-Based Antimicrobial Packaging Films
5 a Department of Packaging and Materials Technologys, Faculty of Agro-Industry, 6 Kasetsart University, 50 Phaholoyothin Rd., Chatuchak, Bangkok, 10900, Thailand 7 b KS PackExpert & Associates, PO Box 399, Mansfield, 3724, Australia 8 c School of Engineering and Science, Faculty of Health, Engineering and Science, 9 Victoria University, P.O. Box 14428, Melbourne, 8001, Australia 10 d Departmen...
متن کاملPreparation/Characterization of Plasticized Poly (Lactic Acid) For Packaging Applications
In this research an attempt is made to modify the brittle poly (Lactic acid) (PLA) into flexible PLA by adding Poly (Butylene Succinate) (PBS), Poly (Ethylene Glycol) (PEG) and Ricinoleic acid (R.ACID) as a plasticizer. Various plasticizers with different weight % of plasticizers 10%, 20% and 30% in wt% for PLA/PBS, 5, 10 and 15% for PLA/PEG and PLA/R.ACID are used to make sheets. With the addi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Renewable Materials
سال: 2021
ISSN: 2164-6341
DOI: 10.32604/jrm.2021.011081