Melamine formaldehyde: curing studies and reaction mechanism
نویسندگان
چکیده
منابع مشابه
Effects of Melamine Addition Stage on the Performance and Curing Behavior of Melamine-Urea-Formaldehyde (MUF) Resin
Three formaldehyde-based resins were prepared: urea-formaldehyde (UF) resin without melamine modifier (named UF0 resin) and melamineurea-formaldehyde (MUF) resins with melamine modifier added at two different synthesis stages (named MUF1 resin and MUF2 resin). The effects of the melamine addition stage on the performance and curing behavior of MUF resin were studied. Three-ply plywood bonded by...
متن کاملSynthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins
Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obt...
متن کاملDesigning of cardanol based polyol and its curing kinetics with melamine formaldehyde resin
Commercially used industrial baking enamels consist of alkyd or polyester resin with melamine formaldehyde. These resins are mainly derived from fossil resources. Considering growing environmental legislation regarding use of petroleum based raw materials, utilization of renewable resources to synthesize various chemistries can be the only obvious option as far as academia and industries are co...
متن کاملPulsed photoacoustic studies of thermoset curing reaction
A pulsed photoacoustic technique was used for generation of ultrasonic pulses along with optical detection inside a transparent polymer resin undergoing a curing reaction. The changes in acoustic parameters during the solidification process was measured and were found to agree with the accepted general model for the kinetics of the curing reaction for polyester and epoxy resins. The advantages ...
متن کاملSynthesis and Characterization of Sucrose-Melamine- Formaldehyde Adhesives
The objective of this project was to use sucrose as a partial substitute for melamine in the synthesis of sucrose–melamine-formaldehyde (SMF) resin. The SMF was synthesized in a base condition. The wet bonding strength, shelf life, and formaldehyde emission of the SMF resin were determined. Fourier transform infrared spectroscopy (FT-IR) and mass spectroscopy (MS) were employed to analyze the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Journal
سال: 2012
ISSN: 0032-3896,1349-0540
DOI: 10.1038/pj.2012.162