Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
نویسندگان
چکیده
منابع مشابه
Lubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملSintering Aids in Powder Metallurgy THE ROLE OF THE PLATINUM METALS IN THE ACTIVATED SINTERING OF REFRACTORY METALS
When a metallic powder is subjected to a suffkiently high pressure a certain amount of adhesion takes place between individual particles. If this compact i s then sintered the bond is improved by diflusion and intergranular grain growth. The earliest known platinum objects were fabricated by such a powder metallurgical process, and when European scientists first addressed the problem of manufac...
متن کاملEffect of Sintering Temperature on Density, Porosity and Hardness of a Powder Metallurgy Component
The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control porosity of powder metallurgy components and retain them to desired amount when required. The porosity of a powder metallurgy component is greatly depends on the sintering temperature. In t...
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملMultiprobe impedance measurement system for nondestructive evaluation and test of "green state" powder metallurgy parts
This paper describes an instrument capable of detecting flaws in "green-state" (prior to sintering) powder metallurgy (P/M) parts. The instrument uses a matrix of impedance measurements from a multiprobe array which contacts the surface of the P/M part. The array of measured data is processed to not only detect the presence of flaws, but also determine their location, size, and orientation. Exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2021
ISSN: 2075-4701
DOI: 10.3390/met11060994