Medical Applications of Hollow Fiber Membranes
نویسندگان
چکیده
منابع مشابه
Fabrication of Crosslinkable Hollow Fiber Membranes for Pervaporation Dehydration
Integrally-skinned asymmetric Polyetherimide/Poly (vinyl alcohol) (PEI/PVA) hollow fber membranes for pervaporation dehydration were fabricated by non-solvent induced phase inversion. PVA inside the PEI matrix could be crosslinked to provide membrane performance stability during long term operation. The effects of different PEI/PVA blend ratio, external coagulant type and...
متن کاملPolyethersulfone Hollow Fiber Membranes for Hemodialysis
Polyethersulfone (PES) is one of the most important polymeric materials and is widely used in separation fields. PES and PES-based membranes show outstanding oxidative, thermal and hydrolytic stability as well as good mechanical and film-forming properties. PES membranes could endure many kinds of sterilized methods, including epoxy ethane gas, steam, and γ-ray. Furthermore, PES-based membranes...
متن کاملFabrication and Modification of Thin-Film Composite Hollow Fiber NF Membranes
This study focuses on the preparation and modification of a thin-film composite (TFC) hollow fiber polyamide membrane fabricated by the interfacial polymerization of Piperazine (PIP) and trimesoyl chloride (TMC) on a porous polysulfone substrate. The effects of triethylenetetramine (TETA) and silica nanoparticles (SiO2) contents in the aqueous phase (as the additives) on the morphology and perf...
متن کاملPreparation of Polyvinylidene Fluoride (PVDF) Hollow Fiber Hemodialysis Membranes
In this study, the polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS). The influences of PVDF membrane thickness and polyethylene glycol (PEG) content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the struc...
متن کاملFailure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes
Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzoli...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1985
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.41.11_p440