Medical Applications Based on MEMS Technologies
نویسندگان
چکیده
منابع مشابه
MEMS and BST Technologies for Microwave Applications
2002 v ACKNOWLEDGEMENTS For the past four years I owe a lot to my advisory committee, my friends, my family, and many other people who always supported me, without whom it is almost impossible for me to get this work done. Care and support from all these people gave me the confidence, their encouragement means so much to me throughout those countless hard-working days and nights. I am deeply gr...
متن کاملThick-film Actuation Technologies for Mems Applications
⎯ This paper compares two thick-film actuation technologies and assesses their suitability for use within micromachined devices. The materials are a piezoelectric composition, which exhibits a d33 coefficient of the order of 130pC/N, and a magnetostrictive material which possess a magnetostriction of 4.4ppm at a magnetic field of 11.5kA/m. Examples of their application in micromachined devices ...
متن کاملMEMS Technologies for High Frequency Applications
In this paper, we reviewed RF MEMS research efforts in planar structures and phased arrays. For planar transceivers, we have demonstrated several RF MEMS devices in order to establish building blocks in integrated millimeterwave systems. For phased-array applications, we have demonstrated two architectures for beam forming and steering without solid-state phase shifters.
متن کاملWireless Remote Weather Monitoring System Based on MEMS Technologies
This study proposes a wireless remote weather monitoring system based on Micro-Electro-Mechanical Systems (MEMS) and wireless sensor network (WSN) technologies comprising sensors for the measurement of temperature, humidity, pressure, wind speed and direction, integrated on a single chip. The sensing signals are transmitted between the Octopus II-A sensor nodes using WSN technology, following a...
متن کاملDemonstration of a Micro-cpl Based on Mems Fabrication Technologies
Utilizing current Micro Electro Mechanical Systems (MEMS) technologies, a three-port microcapillary pumped loop (micro-CPL) was designed, fabricated and tested to provide integral cooling to electronics or MEMS type devices. The two wafer design consists of one silicon and one borofloat glass wafer. An analytical study was used in determining the geometry of the device, including the evaporator...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2017
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.68.367