Medical application and biocompatibility of TiNi alloy.
نویسندگان
چکیده
منابع مشابه
Deformation Properties of TiNi Shape Memory Alloy
In order to describe the deformation properties due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy, a thermomechanical constitutive equation considering the volume fractions of induced phases associated with both transformations is developed. The proposed constitutive equation expresses well the properties of the shape memory effect, pseudoelasticity...
متن کاملThermomechanical Properties of TiNi Shape Memory Alloy
The thermomechanical properties of shape memory effect and superelasticity due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy were investigated experimentally. The transformation line, recovery stress and fatigue property due to both transformations were discussed for cyclic deformation. The thermomechanical properties due to the R-phase transformati...
متن کاملShape Memory Alloy Actuator forBio-medical application
In this paper various applications of shape memory alloys (SMA) in bio-medical field based upon their material properties are discussed, and a novel SMA spring actuator design for biopsy is proposed. Design parameters such as spring configuration, wire diameter required for designing the actuator were defined and obtained through experiments. Finally, itconcludeswith the possibility of using SM...
متن کاملBiocompatibility of NiTi Alloy Implants in vivo
In this study, the powders of Ni and Ti with 50.5 at.% Ni for 12 h were blended and cold pressed at the different pressures (50, 75 and100 MPa).The porous product obtained after Ni-Ti compacts were synthesized by SHS (self-propagating hightemperature synthesis) in the different preheating temperatures (200, 250 and 300oC) and heating rates (30, 60 and 90oC/min). The effects of the pressure, pre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Japan Institute of Metals
سال: 1985
ISSN: 0021-4426,1884-5835
DOI: 10.2320/materia1962.24.69